GAS COOLING NOZZLES & LANCES - SINGLE or DOUBLE FLUID

   

SINGLE FLUID
 
flow rate ranges @ 35 bar 5,3 - 500,0 lpm
spray angle ranges 30 - 90 degree
pressure ranges 20 - 40 bars
material ranges AISI 316 - AISI 420 - Titanium - TC
industries served mainly cement and steel industries
key benefits finer droplets, longer life, fast delivery, high pressure
quick fit accessories no
product availability more than 900 options
Gas cooling can be achieved by standard full or hollow cone nozzles. The types mentioned in this section are the gas cooling nozzles which are used for the applications where the sprayed water or liquid is requested to be evaporated 100% in a certain reaction length.
Such nozzles are combined with special lances that enable the return of the liquid back to the water tank by the help of return flow valve. That's why these nozzles and lances are called as return flow or spillback. The spray formation is hollow cone which helps to create maximum contact surface in between the hot gas and the sprayed liquid.
FTR designs manufactures and erects the gas cooling systems especially for gas cooling towers in the cement plants. These systems are presented under our own brand COOLING CONTROL®. 


DOUBLE FLUID

flow rate ranges 0,5 - 200 Lpm
spray angle ranges 15 - 50 Degree
pressure ranges 2 - 5 bars
material ranges AISI 316 - Hastelloy C276-C22-C4
industries served mainly cement and steel industries
key benefits finest droplets, single or multiple orifices, low pressure
quick fit accessories no
product availability more than 500 options
 
Gas cooling can be achieved by standard full or hollow cone nozzles. The types mentioned in this section are the gas cooling nozzles which are used for the applications where the sprayed water or liquid is requested to be evaporated 100% in a certain reaction length. The difference of the low-pressure gas cooling nozzles is that there is no return flow like in high-pressure type, and the liquid and compressed air are used at the same time in order to break the liquid into possible finest droplets. The reaction length for full evaporation is shorter in this case due to the fact that the droplets are smaller than that of high-pressure version.
FTR designs manufactures and erects the gas cooling systems especially for gas cooling towers in the cement plants. These systems are presented under our own brand COOLING CONTROL®.