HOLLOW CONE - AXIAL FLOW - SINGLE ORIFICE - Circular spray

      

flow rate ranges @ 3 bar 0,2 - 94 lpm
spray angle ranges 60 - 180 degrees
pressure ranges 0,5 - 50 bars
material ranges major metals
connection ranges 1/4'' - 1/2''
industries served all industries
key benefits longer life, larger contact area in gases
quick fit accessories yes
product availability more than 3.500 options

The liquid is fed in the axial direction for this type hollow cone nozzles. The spray formation is conical but the inner side of the cone has no liquid. The spray formation when it touches the surface being treated is circular only. The liquid distribution in the circular form is very uniform. The inner surface of the spray form with fine droplet creates a large contact area therefore these nozzles are commonly used in gas treatment applications. The specially machined S-groove insert inside the body is mainly the key element to form the hollow cone.

HOLLOW CONE - TANGENTIAL FLOW - SINGLE ORIFICE - Circular spray

  

flow rate ranges @ 3 bar 0,39 - 665 lpm
spray angle ranges 50 - 130 degrees
pressure ranges 0,3 - 10 bars
material ranges all machinable metal grades and some plastics
connection ranges 1/8'' - 3/4''
industries served all industries
key benefits clog free, longer life, a larger contact area 
quick fit accessories yes
product availability more than 2.500 options

The spray formation is conical without any liquid inside the cone. The main difference is the body shape and feed line direction which is 90° deflected with respect to nozzle spray orifice. The body has also an inner orifice that is located eccentric to create centrifugal rotation to form the hollow cone spray. Since there is no additional internal piece inside the body, these nozzles are resistant to clogging.