FULL CONE SPRAY NOZZLES

FULL CONE NOZZLES - AXIAL FULL CONE - SINGLE ORIFICE - Round spray (Conical)

 

    

flow rate ranges @ 3 bar 0,74 - 9410 lpm
spray angle ranges 15 - 120 degrees
pressure ranges 0,5 - 20 bars
material ranges all machinable metal grades and most of plastics
connection ranges 1/4'' - 8'' & flanges
industries served all industries
key benefits larger coverage, longer life, fast delivery
quick fit accessories yes
product availability more than 9.000 options

The axial flow single orifice full cone nozzles form a conical shape form that covers the complete surface. This type is accepted as the most common standard one in the full cone nozzle family. The wide option for materials, flow rates, spray angles and connections make these nozzles quite preferable where the conical spray formation is demanded.
The axially fed liquid is swirled inside the nozzle body by the help of specially machined X-insert, slotted disc or S-vanes so that the liquid is shaped full conical just after it leaves the nozzle orifice.

FULL CONE - AXIAL FLOW - SINGLE ORIFICE - Square spray (Pyramid)

      

flow rate ranges @ 3 bar 2,70 - 4200 lpm
spray angle ranges 60 - 120 degrees
pressure ranges 0,7 - 20 bars
material ranges AISI 303, AISI 316, Brass
connection ranges 1/8'' - 6''
industries served all industries
key benefits larger coverage, longer life, straight side geometry
quick fit accessories yes
product availability more than 500 options

The round full cone spray nozzle can be converted to a pyramid (or, square projection on the surface) by a special design of the nozzle orifice section. Orifice looks like a duck-bill which help to form the full pyramid spray formation. The pyramid form turns right or left as the spray height is increased or decreased. These nozzles are specially demaded where the precise limitations are prerequisite for the application.

FULL CONE - AXIAL FLOW - MULTIPLE ORIFICES 

      

flow rate ranges @ 3 bar 1,53 - 490 lpm
spray angle ranges 60 - 130 degrees
material ranges AISI 316
connection ranges 1/2'' - 2''
industries served all industries
key benefits larger contact area, longer life, finer droplets
quick fit accessories yes
product availability more than 200 options

The body structure of the multiple orifice spray nozzles is bigger than common full cone nozzle types. It contains minimum 2 or more orifices in one body. Since the same amount of liquid is divided into smaller orifices, it creates finer droplets compared to the same flow rate single orifice full cone nozzles. The small droplets can be achieved in low pressures i.e. even 1 bar. It is highly recommended to use a line filter due to the risk of orifice clogging. 

FULL CONE - TANGENTIAL FLOW - SINGLE ORIFICE

   

flow rate ranges @ 3 bar 2,30 - 122 lpm
spray angle ranges 60 - 120 degrees
pressure ranges 1 - 7 bars
material ranges all machinable metal grades
connection ranges 1/8'' - 1''
industries served all industries
key benefits clog free, longer life, larger contact area
quick fit accessories yes
product availability more than 1000 options

The spray formation is the same as the axial feed full conical spray nozzles but the body and the feed line is different. The liquid enters the nozzle body from the side (90° deflections with respect to nozzle orifice), and it turns inside the body by the effect of centrifugal forces, finally it leaves the orifice in the form of full cone spray. The orifice is machined in a separate part called as the mouthpiece that can be removed. The flow rate is not only adjusted by orifice itself but also the inner orifice from which liquid enters into the nozzle body. Since there is no insert to create the swirl effect, these nozzles are quite resistant to clogging.